CAN messages into PDM

Discussion and support for MoTeC Power Distribution Modules

Re: CAN messages into PDM

Postby JamieA on Mon May 28, 2012 1:12 pm

Gary,
Please contact this email address for assistance:

support@racegrade.com

MoTeC have not so much as seen one of these switch panels, so I really cant be of much assistnace.

if the question relates to sending from MoTeC device to MoTeC device, then no problems, let me know specifically what you have working, and what bits you need assistance with.

regards,

Jamie
JamieA
 
Posts: 454
Joined: Wed Apr 30, 2008 3:16 pm
Location: Melbourne, Australia

Re: CAN messages into PDM

Postby Scott@FP on Mon May 28, 2012 1:58 pm

That 'pour a martini' button, I want! ;)
Scott@FP
 
Posts: 421
Joined: Thu Jul 10, 2008 7:57 pm

Re: CAN messages into PDM

Postby gary@apt on Wed May 30, 2012 5:20 am

so forgetting this switch panel ive got a m800 oem,a pdm 15 and a cdl dash

i want to take a switch input to pdm ,and send to ecu to turn on things like als,launch disable,

JamieA wrote:Gary,
Please contact this email address for assistance:

support@racegrade.com

MoTeC have not so much as seen one of these switch panels, so I really cant be of much assistnace.

if the question relates to sending from MoTeC device to MoTeC device, then no problems, let me know specifically what you have working, and what bits you need assistance with.

regards,

Jamie
gary@apt
 
Posts: 9
Joined: Wed Apr 15, 2009 5:31 pm

Re: CAN messages into PDM

Postby JamieA on Wed May 30, 2012 2:37 pm

Ok, well that is no problems then..

the way to do that is to:

1) wire the switch into the PDM
2) transmit the input states to the CDL (this is done by default)
3) Recieve the input state CAN message into the CDL
4) use the channel created by that CAN message in an ADL-M800 COMMS template (see attached document for details)
5)configure the M800 switch to point to the ADL channel.

regards,

Jamie
Attachments
DTN0005 ADL data to M800 via CAN comms.doc
(1.02 MiB) Downloaded 1237 times
JamieA
 
Posts: 454
Joined: Wed Apr 30, 2008 3:16 pm
Location: Melbourne, Australia

Previous

Return to PDM15 PDM16 PDM30 and PDM32

Who is online

Users browsing this forum: No registered users and 7 guests