M880 defueling after start

Discussion and support for MoTeC's previous generation ECUs.

M880 defueling after start

Postby jjb on Fri May 25, 2012 12:53 am

Hi - we're having a problem with an M880 mounted on a Ducati 1098R with an SDL. I'm working with a pro tuner, and we've both gotten to the Image level with this problem.

We have the sync/ref mode set to 60 (Ducati special) and the bike starts fine. Right after starting, however, it slowly loses RPM, the lambda readings go lean, and the engine dies after about 5 seconds. It's very much like the fuel is slowly being shut off.

We tested the injectors using the output testing and they seem to work fine. We measured the injector output at 3, 6, 9, and 12 seconds and got proportionally correct fuel volume. We swapped fuel tanks (including pump and filter) off of a running bike, so we eliminated that. We've also swapped batteries and spark plugs and got the same result.

We turned off the lambda feedback and still the same result.

Does this sound familiar to anyone? My friend is sending the ECU to Motec in Calif to get tested, but I thought I'd send out a feeler to see if someone has seen this before.

Thanks!
Jim Brewer - MRA #90, 2008 Ducati 1098R, Motec M880, SDL
User avatar
jjb
 
Posts: 5
Joined: Wed Jun 08, 2011 11:45 pm
Location: Fort Collins, CO

Re: M880 defueling after start

Postby PQatPIT on Fri May 25, 2012 2:07 am

Never seen this before. A tune file would help a lot. :)
PQatPIT
 
Posts: 77
Joined: Fri Jul 11, 2008 10:51 pm

Re: M880 defueling after start

Postby jjb on Fri May 25, 2012 4:25 am

PQatPIT wrote:Never seen this before. A tune file would help a lot. :)

My friend has it on his laptop - I'll see if he can post it.
Jim Brewer - MRA #90, 2008 Ducati 1098R, Motec M880, SDL
User avatar
jjb
 
Posts: 5
Joined: Wed Jun 08, 2011 11:45 pm
Location: Fort Collins, CO

Re: M880 defueling after start

Postby AdamW on Fri May 25, 2012 9:17 am

A log of the injector pulse width and all other related variables during this running period would be the first place to start.
Motorsport Electronics Ltd.
AdamW
Pro User
 
Posts: 265
Joined: Wed Nov 16, 2011 10:08 am

Re: M880 defueling after start

Postby Aurélien on Fri May 25, 2012 5:49 pm

Post start comp ?
Aurélien
 
Posts: 9
Joined: Mon Nov 23, 2009 3:03 am

Re: M880 defueling after start

Postby jjb on Fri May 25, 2012 11:08 pm

AdamW wrote:A log of the injector pulse width and all other related variables during this running period would be the first place to start.

Oh, I forgot to mention that the pulse width modulation looked consient. I'll see if I can get the dump from my friend. Thanks for the responses so far.
Jim Brewer - MRA #90, 2008 Ducati 1098R, Motec M880, SDL
User avatar
jjb
 
Posts: 5
Joined: Wed Jun 08, 2011 11:45 pm
Location: Fort Collins, CO

Re: M880 defueling after start

Postby Holmz on Sat May 26, 2012 7:11 am

jjb wrote:
AdamW wrote:A log of the injector pulse width and all other related variables during this running period would be the first place to start.

Oh, I forgot to mention that the pulse width modulation looked consient. I'll see if I can get the dump from my friend. Thanks for the responses so far.


If the pulses are right, then perhaps the fuel pressure should be logged next?
User avatar
Holmz
 
Posts: 521
Joined: Fri Dec 19, 2008 6:19 pm
Location: Australia and the USoA


Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 13 guests