SDL dash to LIFE F88 ECU

Discontinued earlier generation Dash Loggers

SDL dash to LIFE F88 ECU

Postby busaman on Sun Jan 08, 2012 5:37 am

Does any one know the settings or is there a template for setting up comms between SDL dash to LIFE F88 ECU its all wired in just how do i make them talk to each other.
busaman
 
Posts: 20
Joined: Tue Jul 15, 2008 4:35 am

Re: SDL dash to LIFE F88 ECU

Postby JamieA on Mon Jan 09, 2012 2:15 pm

I must say that I have never seen a Life ECU here in Australia.

Ill ask the MoTec Europe guys if they have any info on this type of ECU.

regards,

Jamie
JamieA
 
Posts: 454
Joined: Wed Apr 30, 2008 3:16 pm
Location: Melbourne, Australia

Re: SDL dash to LIFE F88 ECU

Postby busaman on Mon Jan 09, 2012 7:04 pm

ok thanks jamie it will be the same as pectel sq6 and syvecs s8 it is effectivly the same ecu.
busaman
 
Posts: 20
Joined: Tue Jul 15, 2008 4:35 am

Re: SDL dash to LIFE F88 ECU

Postby stevieturbo on Tue Jan 10, 2012 7:32 am

Have you tried asking Pat/Syvecs, or over on the Syvecs forum ?
stevieturbo
 
Posts: 499
Joined: Fri Jul 11, 2008 3:32 am

Re: SDL dash to LIFE F88 ECU

Postby busaman on Tue Jan 10, 2012 9:52 am

not as yet i only registered today.
busaman
 
Posts: 20
Joined: Tue Jul 15, 2008 4:35 am

Re: SDL dash to LIFE F88 ECU

Postby AlanB on Tue Jan 10, 2012 9:45 pm

The attached ADL2 file has a set of LIFE F88 templates in it. You can save them from within ADL2 Manager then move them to the SDL comms directory to make them available from within SDL Manager.

As the SDL only has 6 CAN slots, you will have to pick and choose which templates you use as there are more than 6.
Attachments
LIFE F88 ADL2 LMP.D45
(234.42 KiB) Downloaded 1219 times
Alan Bell
MoTeC Europe Ltd
User avatar
AlanB
 
Posts: 104
Joined: Tue May 20, 2008 11:25 pm

Re: SDL dash to LIFE F88 ECU

Postby busaman on Wed Jan 11, 2012 2:47 am

thank you very much alan.
busaman
 
Posts: 20
Joined: Tue Jul 15, 2008 4:35 am

Re: SDL dash to LIFE F88 ECU

Postby busaman on Tue Jan 17, 2012 6:05 am

AlanB wrote:The attached ADL2 file has a set of LIFE F88 templates in it. You can save them from within ADL2 Manager then move them to the SDL comms directory to make them available from within SDL Manager.

As the SDL only has 6 CAN slots, you will have to pick and choose which templates you use as there are more than 6.


alan is there a particular way to save and install them, i can see them in adl manager but the ones in sdl manager seem to be a different file type.and dont show up when i open sdl manager.
dave
busaman
 
Posts: 20
Joined: Tue Jul 15, 2008 4:35 am


Return to ADL, ADL2 and SDL

Who is online

Users browsing this forum: No registered users and 1 guest