Problem with Gear Detection on USDM EVO 9 MR

Discussion and support for MoTeC's previous generation ECUs.

Re: Problem with Gear Detection on USDM EVO 9 MR

Postby anthony_hk2001 on Mon Jan 02, 2012 2:05 pm

Yes, the MDC offers lots of advantages such as all four wheel's speed. The GPS from CDL3 will give me the ground speed.
anthony_hk2001
 
Posts: 15
Joined: Tue Aug 09, 2011 8:29 am

Re: Problem with Gear Detection on USDM EVO 9 MR

Postby Scott@FP on Fri Feb 03, 2012 12:03 pm

I went and revisited this, and it doesn't seem to matter whether you use a diff ratio or not, correct gear gets calculated instantly. Seems that as long as the gear RATIOS entered are close to being correct, doesn't matter if its primary ratios only, or not including final drive, still works.

However you do need to turn on TC/LC (Mx00), otherwise gnd/drv speeds are not calculated and stay zero.
Scott@FP
 
Posts: 421
Joined: Thu Jul 10, 2008 7:57 pm

Re: Problem with Gear Detection on USDM EVO 9 MR

Postby anthony_hk2001 on Sun Feb 05, 2012 8:29 am

Actually I had that sorted out already and its working now, thanks.
anthony_hk2001
 
Posts: 15
Joined: Tue Aug 09, 2011 8:29 am

Previous

Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 32 guests