M84 ECU Manager Ver 1.10K2 can't adjust RS232
There no RS232 telemetry Setup at
Adjust>General Setup>Communications
Tell me How to Set Up or Send Program Patch
Can't setup GPS!!
3 posts
• Page 1 of 1
Can't setup GPS!!
by dermizu on Sun Oct 16, 2011 1:22 pm
- dermizu
- Posts: 3
- Joined: Sun Sep 25, 2011 2:29 pm
Re: Can't setup GPS!!
by OmarK on Tue Oct 18, 2011 1:24 pm
Hi,
The RS232 RX on an M84 is fixed to a Baud rate of 19200 and cannot be changed as this is hardcoded into the firmware. Are you using a GPS with a different baud rate?
The RS232 RX on an M84 is fixed to a Baud rate of 19200 and cannot be changed as this is hardcoded into the firmware. Are you using a GPS with a different baud rate?
- OmarK
- Posts: 214
- Joined: Mon Nov 10, 2008 4:39 pm
Re: Can't setup GPS!!
by dermizu on Fri Oct 21, 2011 4:33 pm
Hi,
My tuner connected
GPS TX PIN to ECU TX PIN
So, it's reconnect
GPS TX PIN to ECU RX PIN
It's working!!
Thanks.
My tuner connected
GPS TX PIN to ECU TX PIN
So, it's reconnect
GPS TX PIN to ECU RX PIN
It's working!!
Thanks.
- dermizu
- Posts: 3
- Joined: Sun Sep 25, 2011 2:29 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 15 guests