ADL3 Math functions

[adelaide]

Can someone please explain what "math functions" are? Examples and how they are used?? Thanks!

[Holmz]

Maybe try the i2 notes.

http://www.motec.com.au/downloads/downloadseminars/

[JamieA]

you can create maths functions in ADL3 that allow live calculations as the car drives.

examples of this include:
*roll and pitch calculations
*brake bias calculations
*wheel lock lights

Advanced maths works basically the same as i2 maths, with a few less functions.

-Jamie

[Holmz]

you can create maths functions in ADL3 that allow live calculations as the car drives.

examples of this include:
*roll and pitch calculations
*brake bias calculations
*wheel lock lights

Advanced maths works basically the same as i2 maths, with a few less functions.

-Jamie

Jamie,

Do these also work in the ACL?
Interested in the *roll and pitch calculations and making use of them in the ACL.

~Holmz

[OmarK]

yes these calculations can be done in the ACL. They are quite handy for people who don't have the pro logging upgrade and therefore unable to use the maths facility in i2 Pro.

[Holmz]

yes these calculations can be done in the ACL. They are quite handy for people who don't have the pro logging upgrade and therefore unable to use the maths facility in i2 Pro.

Where are those examples at ?

[OmarK]

Here are a few simple ones:

Brake Bias
'Brake Pres Front'[kPa]/('Brake Pres Rear'[kPa]+'Brake Pres Front'[kPa])

Damper Velocity
diff_sec("Damper Pos FL")

Roll/Pitch Calculations you would need the geometry parameters of your car and fill in the variables with channels measured by the ACL/ADL3 and set up these equations.