Ls2 map sensor calabration

Discussion and support for MoTeC's previous generation ECUs.
Post a reply

Ls2 map sensor calabration

Postby Daniel on Sun Nov 21, 2010 5:51 am

Hi all

I am running a Ls2 with a M800 and are having problems with the MAP sensor.Its the stock one and at the moment
i have it set up as a delco 100kpa.I know this must be wrong as i am getting a error sometimes and its doing silly things when i pull the logging after a run.

Has anyone run a STD Ls2 MAP sensor?

Thanks For you help

Daniel
Danic Performance
User avatar
Daniel
 
Posts: 39
Joined: Thu Jul 10, 2008 2:06 pm
Location: Cudal NSW
Top

Re: Ls2 map sensor calabration

Postby stevieturbo on Tue Nov 23, 2010 12:58 am

Why not get a Mityvac and calibrate it manually ? That way there is no guesswork going on.
stevieturbo
 
Posts: 499
Joined: Fri Jul 11, 2008 3:32 am
Top

Re: Ls2 map sensor calabration

Postby Daniel on Tue Nov 23, 2010 9:38 pm

I would be sure that someone has done one.
Danic Performance
User avatar
Daniel
 
Posts: 39
Joined: Thu Jul 10, 2008 2:06 pm
Location: Cudal NSW
Top

Re: Ls2 map sensor calabration

Postby Martin on Wed Nov 24, 2010 3:21 am

Ive never had issues using the same cal. Under high vacuum they tend to pull output below 0.1v that could cause you to see strange things. Have you tried setting Diag Lo lower?
User avatar
Martin
Pro User
 
Posts: 640
Joined: Thu Jul 10, 2008 2:57 am
Location: Pretoria, Suid Afrika
Top

Re: Ls2 map sensor calabration

Postby Daniel on Wed Nov 24, 2010 5:32 am

I will try that tonight .

Thanks
Danic Performance
User avatar
Daniel
 
Posts: 39
Joined: Thu Jul 10, 2008 2:06 pm
Location: Cudal NSW
Top
Post a reply

Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 30 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Glacier Style Designed by Ika © 2007, 2008 ShadowFlames Development