Software upgrade problem.

Covers current and earlier Subaru and Mitsubishi Plug-In systems

Software upgrade problem.

Postby Leo on Fri Oct 01, 2010 6:57 pm

Hallo all.
I have 2 M800 PnP ECU #10575 #10961
I need upgrade this ECU`s from 3.52J2 to 3.52P2
When i try it I see message window "Device is not in loader. The CAN Data Rate setting may be incorrect.)
Others ECU were updated well.
Can any one help me?
Leo.
Attachments
CAN Data Rate.JPG
CAN Data Rate.JPG (88.88 KiB) Viewed 15452 times
Leo
 
Posts: 9
Joined: Mon Feb 22, 2010 11:17 pm

Re: Software upgrade problem.

Postby SprinterTRD on Sat Oct 02, 2010 7:50 am

Go to "TOOLS" menu and then "Connection settings" and change the CAN comms rate.

If its 1M change it to 500K. If its 500K change it to 1M

You should do this before you connect to the ECU
SprinterTRD
Pro User
 
Posts: 377
Joined: Wed Jul 16, 2008 9:24 am

Re: Software upgrade problem.

Postby Leo on Sat Oct 02, 2010 5:01 pm

Sorry, SprinterTRD. You tips not for me.
Please, look the attached screenshot....
Communication excellent! I have activated option code and loaded map to ECU...
Leo.
Leo
 
Posts: 9
Joined: Mon Feb 22, 2010 11:17 pm

Re: Software upgrade problem.

Postby SprinterTRD on Mon Oct 04, 2010 7:40 am

The ECU you have is a 500K one to suit the can bus in the car.
Although you can communicate with it at 1Mb you can only upgrade it at 500K
SprinterTRD
Pro User
 
Posts: 377
Joined: Wed Jul 16, 2008 9:24 am

Re: Software upgrade problem.

Postby Leo on Mon Oct 04, 2010 3:33 pm

Many thanks SprinterTRD. The problem is solved.
It is true for ECU, marked 500к on a socket only.
Leo.
Leo
 
Posts: 9
Joined: Mon Feb 22, 2010 11:17 pm


Return to M800 Plug-In ECUs

Who is online

Users browsing this forum: No registered users and 2 guests