Hi/Lo injectors during cranking

[Polux RSV]

I have a setup with man injectors as primary, and top feed inj as secondary.
Setting the balance table with all 0, pri injectors only, I can still see the secondary spraying at first injection and during cranking.
Is this behaviour correct ????

Angelo

[IDP]

Table with all 0's is actually all secondary injectors....

[Polux RSV]

Sorry, I made a typo. I wrote 0 instead of 100.
Thanks IDP.

Angelo

[RossB]

Use the Primary BAlance on/off and Secondary Balance on/off parameters in the Secondary Injection setup to switch the injectors off when they are not being used.