Its last moments.......
K20, GT35R, M800
Rod failure
6 posts
• Page 1 of 1
Rod failure
by Martin on Mon Jun 28, 2010 9:32 pm
- Attachments
-
- Rod failure
- rod fail.jpg (112.62 KiB) Viewed 18493 times
-
Martin - Pro User
- Posts: 640
- Joined: Thu Jul 10, 2008 2:57 am
- Location: Pretoria, Suid Afrika
Re: Rod failure
by Martin on Fri Jul 02, 2010 10:50 pm
A big-end bolt failed.....engine has done about 2000Km with a RPM limit of 8600Rpm.
Mostly track use.
Mostly track use.
-
Martin - Pro User
- Posts: 640
- Joined: Thu Jul 10, 2008 2:57 am
- Location: Pretoria, Suid Afrika
Re: Rod failure
by Alex B on Thu Jul 08, 2010 8:40 am
Hi Martin,
Which conrods and crank are used in the engine?
Whats the rod bearing oil clearance?
What oil used and its running temp?
What is the engine torque and boost?
Cheers
Alex
Which conrods and crank are used in the engine?
Whats the rod bearing oil clearance?
What oil used and its running temp?
What is the engine torque and boost?
Cheers
Alex
- Alex B
- Posts: 57
- Joined: Thu Oct 16, 2008 6:32 am
Re: Rod failure
by Mazi on Thu Jul 08, 2010 8:55 pm
Drivers always have to push the throttle to the bottom after engine explosion. Isn't it strange? 
-
Mazi - Posts: 146
- Joined: Thu Jul 24, 2008 8:45 pm
Re: Rod failure
by Martin on Fri Jul 09, 2010 4:28 am
Alex B wrote:Hi Martin,
Which conrods and crank are used in the engine?
Whats the rod bearing oil clearance?
What oil used and its running temp?
What is the engine torque and boost?
Cheers
Alex
Rods = Eagle
Pistons and the rest im not sure...
Oil Running temp......use to be 110`s in 10lap race but bigger cooler was fitted and also position and ducting changed. Brought it down to high 70`s
Boost = 200KpaA
Overboost button = 240KpaA for 15 sec`s
200KpaA makes just over 300Kw on Dynapack at 86KpaA altitude (1400m)
-
Martin - Pro User
- Posts: 640
- Joined: Thu Jul 10, 2008 2:57 am
- Location: Pretoria, Suid Afrika
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests