Hi all, I am in need for ecu manager 3.4 software to connect to my m800. I am staying away from 3.5 until I understand better how the upgrade would effect my current maps. Can somebody please help share the 3.4 software?
Regards
edmund
Ecu manager 3.4
2 posts
• Page 1 of 1
Ecu manager 3.4
by edmundturner on Mon May 17, 2010 2:38 pm
- edmundturner
- Posts: 4
- Joined: Sun May 16, 2010 1:01 pm
Re: Ecu manager 3.4
by DarrenR on Fri May 21, 2010 11:07 am
Hi Edmund,
Your MAPs will not be affected. There is only added functionality and bug fixes in 3.5 over 3.4.
If you have a copy of your configuration on your PC just upgrade to 3.5.
I only mention having a copy of you config as if you have a problem during the upgrade like loss of power of comms unplugged you could in a rare occasion lose your config out of the ECU.
If you are careful and ensure the laptop doesn't get knocked and batteries are charged etc, then there is no danger in upgrading and you config will be upgraded in the process.
Your MAPs will not be affected. There is only added functionality and bug fixes in 3.5 over 3.4.
If you have a copy of your configuration on your PC just upgrade to 3.5.
I only mention having a copy of you config as if you have a problem during the upgrade like loss of power of comms unplugged you could in a rare occasion lose your config out of the ECU.
If you are careful and ensure the laptop doesn't get knocked and batteries are charged etc, then there is no danger in upgrading and you config will be upgraded in the process.
Darren Reynolds
MoTeC Research Centre - Melbourne, Australia.
MoTeC Research Centre - Melbourne, Australia.
- DarrenR
- MoTeC
- Posts: 176
- Joined: Thu May 01, 2008 2:15 pm
- Location: Melbourne, Australia
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests