Wiring anti lag and launch control

Covers current and earlier Subaru and Mitsubishi Plug-In systems

Wiring anti lag and launch control

Postby JOHNDQ on Wed Apr 14, 2010 7:27 am

Hi can anyone help with the above please? I have a Evo VII (EVO48 on circuit board) Just need to know how to wire up the two systems, all the unlocking and maps etc will be taken care of by my mapper :!:

Many thanks for your help John
JOHNDQ
 
Posts: 7
Joined: Mon Apr 12, 2010 7:02 am

Re: Wiring anti lag and launch control

Postby xpro on Wed Apr 14, 2010 8:23 am

If your car has an intercooler spray you can use that for ALS on/off, no need for extra wiring,use digital input function 13. Launch control , also use digitial input and function 14. you might need to add a switch for that,
xpro
 
Posts: 49
Joined: Fri Sep 11, 2009 6:23 pm

Re: Wiring anti lag and launch control

Postby JOHNDQ on Wed Apr 14, 2010 8:35 am

Thanks for your reply mate, i take it i have to connect the wires into the control unit so it gets the demand for the AL and LC do you have any idea which pins these are?

Many thanks again John
JOHNDQ
 
Posts: 7
Joined: Mon Apr 12, 2010 7:02 am

Re: Wiring anti lag and launch control

Postby xpro on Wed Apr 14, 2010 6:50 pm

I dont have the pinout for motec board 48, but i can give you an oem 7 ecu pinout if thats any good to you
xpro
 
Posts: 49
Joined: Fri Sep 11, 2009 6:23 pm

Re: Wiring anti lag and launch control

Postby JOHNDQ on Wed Apr 14, 2010 10:18 pm

I got one from MLR mate thanks, i think i may have seen you there to after a throttle kicker :mrgreen:
JOHNDQ
 
Posts: 7
Joined: Mon Apr 12, 2010 7:02 am

Re: Wiring anti lag and launch control

Postby xpro on Thu Apr 15, 2010 8:40 am

JOHNDQ wrote:I got one from MLR mate thanks, i think i may have seen you there to after a throttle kicker :mrgreen:

8-) yes im on mlr too
xpro
 
Posts: 49
Joined: Fri Sep 11, 2009 6:23 pm

Re: Wiring anti lag and launch control

Postby JOHNDQ on Thu Apr 15, 2010 10:26 pm

:D Any luck finding one
JOHNDQ
 
Posts: 7
Joined: Mon Apr 12, 2010 7:02 am


Return to M800 Plug-In ECUs

Who is online

Users browsing this forum: No registered users and 1 guest