M800 issue,NEED HELP!!!

by **grcforce327** on Tue Aug 12, 2008 9:30 am

The ecu was locked via passwords,I loaded an earlier version 2.xx and then went back and loaded 3.4. Came back as new ecu and I can now send files,but all the logging access is still asking for a password.Anyone run into this???

by **RossB** on Tue Aug 12, 2008 9:47 am

This ECU will need to be returned to MoTeC to have the password cleared. You will need to contact your MoTeC dealer to arrange this.

by **grcforce327** on Tue Aug 12, 2008 10:03 am

I did! Simons over on your side of the world.He's doing some checking to see if there's another way!Why would it say new ecu and clear access password but not log ???

by **grcforce327** on Tue Aug 12, 2008 10:34 am

One more thing Ross,everything is working including log with the earlier version!

by **grcforce327** on Thu Aug 14, 2008 8:50 am

Thanks to Nathan on the west side for all your help!

M800 issue,NEED HELP!!!

M800 issue,NEED HELP!!!

Re: M800 issue,NEED HELP!!!

Re: M800 issue,NEED HELP!!!

Re: M800 issue,NEED HELP!!!

Re: M800 issue,NEED HELP!!!

Who is online