Has anyone done a piggy back or stand alone M800 in a road going Nissan 350z ?
If so are there any driveability issues?
350Z PLUG AND PLAY / PIGGYBACK
3 posts
• Page 1 of 1
350Z PLUG AND PLAY / PIGGYBACK
by JIM on Wed Nov 25, 2009 8:39 am
- JIM
- Posts: 2
- Joined: Wed Oct 28, 2009 1:04 pm
- Location: Brisbane
Re: 350Z PLUG AND PLAY / PIGGYBACK
by Alex B on Sat Dec 12, 2009 7:35 am
Hi Jim,
We have done both the older VQ35DE and newer twin throttle VQ35HR both in piggy back.
1. VQ35DE
Fuel, Igition, VVT, DBW are run by Motec.
2. VQ35HR
Fuel and ignition are on Motec. DBW and VVT on stock ECU.
Both cars are turbocharged. No drivability issues apart from that the stock traction control is not working.
Regards
Alex
We have done both the older VQ35DE and newer twin throttle VQ35HR both in piggy back.
1. VQ35DE
Fuel, Igition, VVT, DBW are run by Motec.
2. VQ35HR
Fuel and ignition are on Motec. DBW and VVT on stock ECU.
Both cars are turbocharged. No drivability issues apart from that the stock traction control is not working.
Regards
Alex
- Alex B
- Posts: 57
- Joined: Thu Oct 16, 2008 6:32 am
Re: 350Z PLUG AND PLAY / PIGGYBACK
by Martin on Mon Dec 14, 2009 1:33 am
If you need the VVT settings on the VQ35HR pm me
-
Martin - Pro User
- Posts: 640
- Joined: Thu Jul 10, 2008 2:57 am
- Location: Pretoria, Suid Afrika
3 posts
• Page 1 of 1
Return to M400, M600, M800 and M880 ECUs
Who is online
Users browsing this forum: No registered users and 13 guests