SLM pre terminated plug - pinouts

[IJ.]

Soon as you configure a user condition for the SLM in Dash Manager it will add "slave tx" to the list of CAN slots in Comms, this is the SLM's channel it can't be "selected".

[bazeng]

Ok,

That makes sense.
I just removed all the SLM conditions and the slave tx went away (CAN6).

Getting closer now!
Now, if I preview the lights on the PC software via the SDL, I should also see this on the SLM?

[IJ.]

Don't think it works that way, still think you need to configure a condition of xx lights to yy colour and set it as rpm=0 then send to the SDL and they should light up.