basemap request - 3SGTE (MR2)

[mr2andy]

Will anyone be able to supply a basemap for 93 Toyota MR2 Turbo: Mod detail as below

M800
T3/T4 Turbo
OEM distributor with magnetic ref/sync sensors
GM 3 Bar map sensor
MSD 6AL-2 CDI ignition
supra 550 injector (planning on upgrading to 1000cc borsch saturated injector)

Cheers
Andy

[mr2andy]

Guys..
I'm currently running another EMS and is setup at batch firing. If I can calculate the millisec of the injector pulse time on the current fuel map then multiply by 2(since it is currently batch firing and it will be sequential using m800) , Will that be a good idea?

Cheers

[mr2andy]

Anyone?

Motec?

Help?

[RossB]

I have attached a start file for a 3SG Turbo which should help you to get started. If you are converting from batch fire to sequential doubling the injection duration is a good place to start from. If you are converting from one system to another you need to also make sure that all of the same compensations are being applied.

[Toyota1968]

.....just so I can find this again