Porsche Chopper CW

[Andrew C]

Looking for the crip setting for the Porsche Chopper wheel, Clockwise..

Thanks...

[JamieA]

Andrew,
we would need a little more information about your vehicle to be able to assist.

which model porsche
What year
What engine

even then, it may not be simple.

Best bet is to measure it yourself on the engine, or use test advance on the engine whilst cranking it over to find the correct position.

regards

Jamie

[Andrew C]

Jamie,

THanks for the post. I should have been clearer. I run a Motec supplied "chopper wheel" that goes inside my factory distribitor. There is a standard setting for these wheels, which Motec in California suppied me with when I first ordered, but I have since misplaced the data. These wheels are in the "GRAIL" engineering listing on the Motec site.. There are seperate "Clockwise and Counter clockwise" wheels, dependant upon the year 911 you are fitting..


Thanks again,
Andrew