Water temp sensor.

MoTeC supplied sensors, valves or wiring discussion

Water temp sensor.

Postby AWP on Thu Jun 25, 2009 6:59 pm

I am getting strange readings from my water temp, I am riding a 08 R1, and aim for around 75-80, whilst going round slower corners, the temp shows just fine, but soon as I accelerate to any real speed the temp just drops right off, even going below ambient temps (lowest I saw was 6), obviously this is not correct, is there anything I should be checking, or could it be a faulty sensor?

Thanks. :)
AWP
 
Posts: 4
Joined: Wed Jun 17, 2009 11:57 pm

Re: Water temp sensor.

Postby J&R on Thu Jun 25, 2009 11:38 pm

check your wiring

check your sensor calibration
and for the sake of $17 Just replace the sensor as well

but first check your wiring
J&R
 
Posts: 20
Joined: Sun Jul 20, 2008 8:48 pm


Return to Sensors, Valves and Wiring

Who is online

Users browsing this forum: No registered users and 7 guests