subaru 2008 crank ref setting ??

[jimarea51]

Hi guys

can you tel me the correct (crip) crank index position setting for a 2008 subaru JDM spec 2 ltr double vvt engine ?
as the 3 base maps i have are all diferent from 547 to 580 !! and the release notes give 2 diferent setings surely on a production engine there cannot be that much error !!! i know its best to check this on each engine but i need to know that im in the right area to start with,,
the base map i was supplied had 580 and the engine sounds very retarded and got very hot on the exhaust at idle


thanks guys

[jimarea51]

any ideas guys ?

thanks

[mhd]

I think 560 coz I recive M800 OEM for 2006 STI in the base map was 580 after checking I found it 560 for the 2006 STI DBW, some people saied that it 550 also
the best way to check by your self

cheers

[RossB]

According to my information it should be 447 on a dual vvt 2.0 enigine. I would always recommend checking it with a timing light though.

[jimarea51]

thanks very much guys