m150 and RG 2 wire temp

[ZT-R]

Hey guys, how do i setup this RaceGrade 1/8 temp sensor? they wired it to "Lamda Narrow 1" channel. i have the voltages entered, not sure how to check if pull-up is active.
here's a link to the docs. sorry for the huge pictures.
https://www.milspecwiring.com/RaceGrade ... p_398.html

[ZT-R]

do i have to change the axis?

[SOReilly]

The lambda narrow inputs aren't really suitable for a temperature sensor.

You should be using an AT input.

[Stephen Dean]

To use the Lambda Narrow input you will need to wire in an external pullup for this sensor.

[ZT-R]

ok i think i gotta find a sensor 5volt supply and tap into that and then the other end goes to the signal. sorry im still learning all this technical stuff.

[ZT-R]

The lambda narrow inputs aren't really suitable for a temperature sensor.

You should be using an AT input.

we would have but we are all out of inputs short of a can expander.