by fdv99 on Mon May 06, 2024 1:44 am
I feel like this should be possible, but I am struggling to figure it out right now. I have a C125 in a car, but no PDM. I would like to use one of the outputs to trigger a relay or interrupt the headlights for a flash/warning to other drivers in an upcoming 24 hour race. I tried with a user condition, but havent been able to figure that out yet. My goal is to press a button I already have wired to the C125, and flash the headlights about 4 times. I feel like the button should trigger a condition, and that condition trigger the output 4 times every 0.5 seconds for a short time, but I am just having trouble implementing it. Any ideas are appreciated.