How is this compensation accessed in the Mx00?
Thanks
M
Mx00 BAP fuel comp
3 posts
• Page 1 of 1
Mx00 BAP fuel comp
by Martin on Tue May 05, 2009 6:37 am
-
Martin - Pro User
- Posts: 640
- Joined: Thu Jul 10, 2008 2:57 am
- Location: Pretoria, Suid Afrika
Re: Mx00 BAP fuel comp
by MarkMc on Tue May 05, 2009 9:39 am
Hi Martin,
The BAP comp is automatically called up in the background and is the same as the standard MAP comp (0% comp at 100KPA and -100% comp at 0Kpa). You cannot access this compensation table to change it.
The BAP comp also only starts when there is no MAP channel, turn on the MAP channel and the BAP comp stops. If you have both channels (MAP and BAP) turned on and you want to do a fuel comp based on BAP as well you will need to make it an axis for either Comp 1 or 2.
The BAP comp is automatically called up in the background and is the same as the standard MAP comp (0% comp at 100KPA and -100% comp at 0Kpa). You cannot access this compensation table to change it.
The BAP comp also only starts when there is no MAP channel, turn on the MAP channel and the BAP comp stops. If you have both channels (MAP and BAP) turned on and you want to do a fuel comp based on BAP as well you will need to make it an axis for either Comp 1 or 2.
- MarkMc
- Posts: 589
- Joined: Thu May 01, 2008 1:28 pm
3 posts
• Page 1 of 1
Return to M400, M600, M800 and M880 ECUs
Who is online
Users browsing this forum: No registered users and 70 guests