Bosch 4.9 LTCD

MoTeC supplied sensors, valves or wiring discussion

Bosch 4.9 LTCD

Postby greenamex2 on Mon Sep 18, 2023 5:53 am

Hi all

Just to check...Can I take it that if one of my two Bosch sensors is reading a lambda of 10.0 that it needs replacement?

The other reads about 1.28 in free air. The reading follow the sensors are switched.
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
Posts: 350
Joined: Fri Sep 12, 2014 7:06 am
Location: England

Re: Bosch 4.9 LTCD

Postby Stephen Dean on Mon Sep 18, 2023 10:02 am

If you do a calibration of the sensor through LTC manager, does it still read 10.0? If so, then it is likely that the sensor has faulted out.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
Stephen Dean
Site Admin
Posts: 1582
Joined: Tue Dec 02, 2014 10:29 am
Location: Melbourne

Return to Sensors, Valves and Wiring

Who is online

Users browsing this forum: No registered users and 0 guests