Hi all
Just to check...Can I take it that if one of my two Bosch sensors is reading a lambda of 10.0 that it needs replacement?
The other reads about 1.28 in free air. The reading follow the sensors are switched.
Bosch 4.9 LTCD
2 posts
• Page 1 of 1
Bosch 4.9 LTCD
by greenamex2 on Mon Sep 18, 2023 5:53 am
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
- greenamex2
- Posts: 370
- Joined: Fri Sep 12, 2014 7:06 am
- Location: England
Re: Bosch 4.9 LTCD
by Stephen Dean on Mon Sep 18, 2023 10:02 am
If you do a calibration of the sensor through LTC manager, does it still read 10.0? If so, then it is likely that the sensor has faulted out.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1721
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
2 posts
• Page 1 of 1
Return to Sensors, Valves and Wiring
Who is online
Users browsing this forum: No registered users and 16 guests