hi together,
i search the method to use my M800 like an AMS 1000 Boost Controler...
I have a Gear Position Sensor and i want to adjust a different turbo boost for
the different gear...if possible i want to increase or decrease the boost with 2
switch...if anyone as a idea....i dont know the right way to do this...
Thanks for advance.
Francois
Boost Control
3 posts
• Page 1 of 1
Boost Control
by insomnia on Tue Apr 21, 2009 9:05 am
- insomnia
- Posts: 90
- Joined: Wed Nov 26, 2008 2:58 am
Re: Boost Control
by OmarK on Fri Apr 24, 2009 2:32 pm
Hi,
Using ECU Manager you can change your x-axis and y-axis in a boost compensation table to the gear channel and rpm channel perhaps and then set your boost trim % quite easily.
Using ECU Manager you can change your x-axis and y-axis in a boost compensation table to the gear channel and rpm channel perhaps and then set your boost trim % quite easily.
- OmarK
- Posts: 214
- Joined: Mon Nov 10, 2008 4:39 pm
Re: Boost Control
by insomnia on Sat Apr 25, 2009 8:54 am
thank you for the answer!
i want to control 2 solenoide for increase or decrease the boost pressure....
i want different boost pressure with the different gear.....
i want to control 2 solenoide for increase or decrease the boost pressure....
i want different boost pressure with the different gear.....
- insomnia
- Posts: 90
- Joined: Wed Nov 26, 2008 2:58 am
3 posts
• Page 1 of 1
Return to M400, M600, M800 and M880 ECUs
Who is online
Users browsing this forum: No registered users and 17 guests