Hey Guys im getting these issues.
as soon as i start revving i get dropouts in the live log any ideas ?
Dropouts on livelog while revving - Solved
3 posts
• Page 1 of 1
Dropouts on livelog while revving - Solved
by karel021 on Sun Sep 04, 2022 4:49 am
- Attachments
-
- IMG_4733.jpg (2.35 MiB) Viewed 3638 times
Last edited by karel021 on Sun Sep 04, 2022 8:37 pm, edited 1 time in total.
- karel021
- Posts: 61
- Joined: Thu Feb 18, 2016 8:01 am
- Location: Sweden
Re: Dropouts on livelog while revving - Solved
by karel021 on Sun Sep 04, 2022 8:36 pm
CPU usage to high.
so need to figure that out.
so need to figure that out.
- karel021
- Posts: 61
- Joined: Thu Feb 18, 2016 8:01 am
- Location: Sweden
Re: Dropouts on livelog while revving - Solved
by NathanB on Sun Sep 04, 2022 9:37 pm
As you had it answered on facebook, CPU usage is too high.
As this is a partner package from what I can remember, you will need to speak to the firmware developer.
An important one you can do yourself is ensure no CAN devices are assigned that are not needed. It's like the ECU transmit and receive can be good CPU savers if not needed.
As this is a partner package from what I can remember, you will need to speak to the firmware developer.
An important one you can do yourself is ensure no CAN devices are assigned that are not needed. It's like the ECU transmit and receive can be good CPU savers if not needed.
- NathanB
- MoTeC
- Posts: 228
- Joined: Thu Oct 15, 2020 1:50 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 24 guests