Hi Guys
Can anyone help me with Barra Cam reference values
Have an M130 that was running AU SOHC 4.0 now changed to barra engine
DBW,VCT & cam sensors all wired in
I believe the crank trigger will still be correct both being 36-1
Thanks
Jason
Barra Cam reference
4 posts
• Page 1 of 1
Barra Cam reference
by slo32 on Mon Jul 04, 2022 2:43 pm
- slo32
- Posts: 2
- Joined: Sat Jul 02, 2022 4:26 pm
Re: Barra Cam reference
by Stephen Dean on Mon Jul 04, 2022 3:41 pm
Hi,
The Ford Duratech Reference Mode should be the correct mode for this engine. if you have an Input Capture, this can be verified.
The Ford Duratech Reference Mode should be the correct mode for this engine. if you have an Input Capture, this can be verified.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1764
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
Re: Barra Cam reference
by rntechnologies on Mon Jul 04, 2022 5:34 pm
Yep, as Stephen mentioned.
Ford Duratec mode, most likely with an offset around 400-420
Crank and Cams are Mag
Ford Duratec mode, most likely with an offset around 400-420
Crank and Cams are Mag
Regards,
Ryan
Powertune Australia
Ryan
Powertune Australia
- rntechnologies
- Pro User
- Posts: 91
- Joined: Tue Aug 07, 2018 9:45 am
- Location: Sydney, Australia
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests