dwell time and injector dead time of LS3 engine

[EagleEyeMotors]

I have project on swap LS3 (comaro orignal engine 2013) , that connected to motec m84, I have connected the ignition on waste spark. my qustion is what is the setup of ignition and injectors ( dwell time and injector dead time )

[Stephen Dean]

Hi,

For us to be able to provide that information you will need to provide the manufacturer name and part number of the injectors and coils as this is how we catalogue this information.

[EagleEyeMotors]

Part number of injector 80527
Part number of coil 12611424

[EagleEyeMotors]

Hi,

For us to be able to provide that information you will need to provide the manufacturer name and part number of the injectors and coils as this is how we catalogue this information.

I include it in the post

[greenamex2]

Manufacturer names?

[Sean]

They're oem GM/Delphi part numbers, I believe.

[Stephen Dean]

Hi,

See the attached calibrations.

The only match that I have for the injector part number is for a FAST brand injector.

[EagleEyeMotors]

Hi,

See the attached calibrations.

The only match that I have for the injector part number is for a FAST brand injector.

in motec m84 there is voltage and fuel effective pulse width only there is no differential pressure how i can apply the table?

[David Ferguson]

Just use the voltage axis, for your fuel pressure setting.