GPR Bugs

[Salasko Racing]

In GPR 1.11.0018 there is the option to use an "ABS Position Switch" and it implies that you could use a rotary switch which would make sense but the available firmware resources are only "Switch 1-8" no rotaries available.

Just noticed what I think is a second bug. Under ECU Transmit the help section states "Bit 32: True(1) if Engine State is Run" however my engine state is currently "startup" and the PDM receives a value of 1 when receiving using the settings below:

CAN Message: 0x119
Offset: Byte 4
Data Size: 8bit
Mask: 01

I may be missing something on this one and haven't gotten it running to see how the state changes yet but seems pretty straight forward.

[Stephen Dean]

Hi Tim,

This has been flagged to be changed in the next release.

[Salasko Racing]

Hi Tim,

This has been flagged to be changed in the next release.

Quoted your reply just so you would see my edit with the 2nd bug I think I found. Thanks for the update on the first.

[Stephen Dean]

Hi Tim,

I have that bitmask as the Engine Run Switch, Engine Run State is 0x119, Byte 4, Mask 80.

[Salasko Racing]

Yeah I went the wrong way with all my bit masking, sorry about that one.

[Stephen Dean]

Hi Tim,

No problems, I've done the same. I'd rather these sort of issues are reported as it means that we need to improve the help to avoid this from happening again.