by Stephen Dean on Mon Aug 03, 2020 12:20 pm
The reason for not having suspension position into the M1 Firmware is that to log these channels at a high enough rate to do correct analysis on them, you are using up the logging rapidly, as well as putting extra CPU load into the M1 for this. We recommend that vehicle development channels are run and logged through a Dash as they are designed for this work, and leave the M1 to run the engine. If you want to run suspension positions into the M1, my recommendation is to run them to the Dash and let it do the processing and logging, and then CAN the data into the M1.
Stephen Dean
MoTeC Research Centre Melbourne, Australia