hello, i'm using a really high perfomance M130 on my 4 cyl tyrbocharged. now i want to play on a v6 e-tec direct injection evinruder marin engine. no way to use my M130 also coupled to very complicades emm from evinrude?
thanks
valerio
evinrude emm e tec
2 posts
• Page 1 of 1
evinrude emm e tec
by valegas on Sun Jun 30, 2019 6:58 am
- valegas
- Posts: 2
- Joined: Sat Dec 16, 2017 11:14 am
- Location: monaco
Re: evinrude emm e tec
by Stephen Dean on Mon Jul 01, 2019 10:45 am
Hi,
If the OEM Evinrude ECU directly controls the injectors and pump for the DI fuel system, then the M130 will not be able to drive the injectors as it does not have the required injector driver hardware. For this you would need to use either an M141 or M142, dependent on the way that the injectors are driven.
If the OEM Evinrude ECU directly controls the injectors and pump for the DI fuel system, then the M130 will not be able to drive the injectors as it does not have the required injector driver hardware. For this you would need to use either an M141 or M142, dependent on the way that the injectors are driven.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
MoTeC Research Centre Melbourne, Australia
-
Stephen Dean - Site Admin
- Posts: 1720
- Joined: Tue Dec 02, 2014 10:29 am
- Location: Melbourne
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 7 guests