Boost aim
3 posts
• Page 1 of 1
Boost aim
by Jimes on Tue Apr 23, 2019 4:55 pm
Hi all bit of a newb here. M400 running on vw 2.0tfsi race car. N75 valve on aux 1 output and as far as I can see everything set for open loop boost control. But no matter what I do, adjusting boost aim table makes no difference to duty cycle? Any pointers for me to check? Thanks
- Jimes
- Posts: 3
- Joined: Mon Apr 22, 2019 1:30 am
Re: Boost aim
by David Ferguson on Wed Apr 24, 2019 3:05 am
Has this previously been working, and now it has stopped, or is this a new installation and setup?
If it's new, you should upload your M400 Configuration so we can see what you've done. How is the auxilary output wired? Is the other side of the valve getting power?
If it's new, you should upload your M400 Configuration so we can see what you've done. How is the auxilary output wired? Is the other side of the valve getting power?
David Ferguson
Veracity Racing Data
Veracity Racing Data
- David Ferguson
- Pro User
- Posts: 1394
- Joined: Fri Nov 07, 2008 2:45 am
- Location: Paso Robles, California
Re: Boost aim
by Jimes on Wed Apr 24, 2019 5:50 am
It’s a 2nd hand unit so maybe setup wrong somewhere. It activates valve when testing aux 1.
- Jimes
- Posts: 3
- Joined: Mon Apr 22, 2019 1:30 am
3 posts
• Page 1 of 1
Return to M400, M600, M800 and M880 ECUs
Who is online
Users browsing this forum: No registered users and 22 guests