C187 Display Mode Change by map switch

[BoehmK]

I would like to change the Display Mode (Race, Practice, Warmup) using a map switch that outputs scaled voltage from 0-5V. Is this possible?

Thank you in advance!

[David Ferguson]

I think the easiest way is to use the "Options..." button on each of the display page setup.

You can enter conditions to enter that page. For example (VoltageSwitch > 0.5 and VoltageSwitch < 0.6). Do that for each page.

[BoehmK]

I will give that a try. Thanks for the tip.