UTC from GPS time

[etienne]

on a c127, would you know how to create a channel from GPS time that could give UTC+1 time ?

[adrian]

At this point in time it isn't possible with a C12x Dash as you require Advanced Maths which is only available on the C18x Dashes to create the equations required.

We are working on making this possible in any Dash if you have Display Creator and may possibly add the functionality to Dash Manager in the future.

[etienne]

Thanks !

I'll wait

[gkwestfrank]

go get the latest beta , it could be done now.

[etienne]

I've juste seen that ! Thanks !

Now, i've got to understand how to set an offset...

[etienne]

I found it !

[etienne]

I think i've missed something : the value is changing every 2 or 3 sec, never showing the same hour/min

[adrian]

Can you please let me know how you have it set up? Which value is changing every 2 or 3 seconds?

[etienne]

the time shown changes : 12:38 then 4:54 then 18:10 etc etc...

i've activated the channel in dash manager : source GPS time, RTC time offset (constant setup : 3600 s), output RTC/UTC time

i've ad the channel to exported channels to use it in display creator

in display creator, channel used is RTCUTC time with %X as time format.

i've been processing to an update of my c127

i've been sending my new diplay creator project


the only thing i didn't do is sending my dash manager config. Could that be the reason ?

[adrian]

If you make any updates to the Dash Manager file you have to resend it and if you change anything in the Display setup (in Dash Manager) you have to update your DC file and send that as well.

If you are still having issues send me your DM and DC files. Send them to support@motec.com.au