Subaru wrx9 m800 OEM ECU STart File

[mhd]

Hi every body
How can I get a start file fo OEM m800 ECU for WRX STI V9

Thank's and Best Regards
M.Olabi

[RossB]

What year is this car, and what engine size (2.0 or 2.5)? Also the original ECU number would help.

[mhd]

The car 2006 2.5L (strokered to 2.71L) DBW

Thank's

[RossB]

The attached file is what we install in the M800 Plug-in as a start up file.

[mhd]

Hi Every Body

Yesterday I start to tune my car but I face 2 problem,
1- I offset the cam table -50 to get the camshaft at 0 ( is that normal ?)
2- Also I add on ignation overall trim 25 degre to make the engine run fine ( is that normal? now at 1000rpm I run 36 degre timming)
3- after some time in tunning 1 and 2 spark pluges stoped working ( is there problem with my tunning setup did this to my spark pluges)

My M800 ECU No. : 10480
Thank's you veru much
Best Regards
M.Olabi

[oah]

dear mhd;
replay for sparks stop working ..... I think there are a problem in your ignition - ref / sync - setup , and you must check the ignition dwell bat. comp.

regards
oah

[mhd]

Hi
The ref / sync - setup I take it from RossB Start File, and the dwell bat is 2.0 at 14V and 2.5 at 12V

Thank's and best Regards
M.Olabi