Single Cylinder Trigger

Discussion and support for MoTeC's previous generation ECUs.

Re: Single Cylinder Trigger

Postby Matek0012 on Mon Dec 18, 2017 4:43 pm

Winning
Attachments
Diesel Engine.rsc2
(64.45 KiB) Downloaded 731 times
Matek0012
 
Posts: 13
Joined: Thu Dec 14, 2017 5:01 pm

Re: Single Cylinder Trigger

Postby Matek0012 on Mon Dec 18, 2017 5:00 pm

So i have now a REF signal
I also have a sync signal

i have got a CRIP which i believe to be correct

the injector and Coil are not cycling.
Attachments
Capture.JPG
Capture.JPG (28.43 KiB) Viewed 8105 times
Diesel LPG.e35
(72 KiB) Downloaded 704 times
Matek0012
 
Posts: 13
Joined: Thu Dec 14, 2017 5:01 pm

Re: Single Cylinder Trigger

Postby Matek0012 on Mon Dec 18, 2017 5:09 pm

the cript is 360 deg out because it is to the next TDC of compression

Sorry that number has since been changed to 175 deg
Matek0012
 
Posts: 13
Joined: Thu Dec 14, 2017 5:01 pm

Re: Single Cylinder Trigger

Postby Matek0012 on Tue Dec 19, 2017 10:38 am

So i have got fuel coming onto the injector but the injector doesnt release fuel when the engine is being turned over
Matek0012
 
Posts: 13
Joined: Thu Dec 14, 2017 5:01 pm

Re: Single Cylinder Trigger

Postby Matek0012 on Tue Dec 19, 2017 11:49 am

updating the latest capture
But i am still getting an error regarding the rev/sync not being synced

im also not getting ANY pulses to the injector or to the coil
Attachments
Capture.JPG
Capture.JPG (114.55 KiB) Viewed 8090 times
Diesel Engine.rsc2
(64.45 KiB) Downloaded 698 times
Matek0012
 
Posts: 13
Joined: Thu Dec 14, 2017 5:01 pm

Re: Single Cylinder Trigger

Postby Matek0012 on Tue Dec 19, 2017 11:54 am

And now this has just happened
Attachments
Capture.JPG
Capture.JPG (110.4 KiB) Viewed 8090 times
Matek0012
 
Posts: 13
Joined: Thu Dec 14, 2017 5:01 pm

Previous

Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 13 guests