SprinterTRD wrote:Yep, that's the one you need
Ok, this is getting pretty frustrating...
I've paid to have the M8 Upgraded to v6 through my local Motec dealer, then set "Telemetry Data Set" to 1 on the M8 and used "MoTeC M8 Set 1" (and 0) templates in dash manager as outlined by Adrian.
Attempting to view standard channels from the ecu, it's the same as before v5, the data either doesn't show or is incorrect. e.g. at idle my rpm says up around 7k and my air temp is over 100c. I understand I can modify the channels, but it defeats the point of the template i'd think, and if i can't find documented channel information to configure manually it makes it pretty hard.
I never ask questions on forums as i like to work things out myself, but this just isn't working for me!
Appreciate any direction/tips
Dave
P.S. What is the difference between the Dash Manager templates "MoTeC M8 Set 0" and "MoTeC M8 Set 1"?