Quick intro:
Honda 4 speed transmission
Uses OEM vehicle speed sensor (5 pulses per rev)
Gear ratios are as follows:
1st 3.000
2nd 1.917
3rd 1.333
4th 1.045
Final drive output is 4.20
Front wheel drive
Speed detection is good. Don't get any speed errors on the drive.
I can get gears 1-3 to detect just fine with a 'gear estimate tolerance' setting of 0.320.
Since the ratio between 3-4th is only .288 if I put a tolerance setting of .140 then gears 1-3 don't detect and display default, and 4th sometimes displays the correct gear.
It seems like I need multiple tolerance settings to detect my gears properly.
Can anyone advise?
Thanks,
Chris