I'm wondering if these EGT wires can be cut/ shortened and passed though an Autosport connector on the firewall. They'll be going to a Race Grade TC8 mounted inside the car.
-Thanks
EGT Sensors to Autosport connector?
4 posts
• Page 1 of 1
EGT Sensors to Autosport connector?
by CNDat510 on Tue May 30, 2017 6:57 pm
- Attachments
-
- IMG_0991.jpg (205.84 KiB) Viewed 16044 times
- CNDat510
- Posts: 18
- Joined: Mon Nov 21, 2016 12:03 pm
Re: EGT Sensors to Autosport connector?
by AdamW on Tue May 30, 2017 8:38 pm
Yes it can be done provided you use the correct terminals. They need to be Alumel and Chromel and they are available in size 22 for the standard AS connectors. Note wire needs to be proper "compensation cable" also to minimise cold junction error.
Motorsport Electronics Ltd.
- AdamW
- Pro User
- Posts: 265
- Joined: Wed Nov 16, 2011 10:08 am
Re: EGT Sensors to Autosport connector?
by Scott@FP on Tue May 30, 2017 10:02 pm
The extension wire (and connector terminals if possible) needs to match the TC type. T, K, J etc. all use different wire.
You can get TC type specific bulkhead connectors.
You can get TC type specific bulkhead connectors.
- Scott@FP
- Posts: 421
- Joined: Thu Jul 10, 2008 7:57 pm
Re: EGT Sensors to Autosport connector?
by CNDat510 on Sun Aug 27, 2017 10:13 am
Hey guys, sorry for radio silence, somehow I lost track of this thread and missed your replies 
Thanks for the taking the time to respond, this helps immensely.
-Cory
Thanks for the taking the time to respond, this helps immensely.
-Cory
- CNDat510
- Posts: 18
- Joined: Mon Nov 21, 2016 12:03 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests