Motec M4 which laptop?

Discussion and support for MoTeC's earlier generation ECUs

Motec M4 which laptop?

Postby Marky on Mon May 22, 2017 4:48 pm

Hi all
I'm looking at getting. A laptop to tune the and hook up to the M4. Have people had success with either the Dell 620 or 630? The recommended spec from Motec seems to be a struggle to tick all the box's with the graphics card and screen resolution, but I have found a few posts in America where people have used the Dell laptops even though they don't meet the criteria.
Any help would be great

Thanks Mark
Marky
 
Posts: 5
Joined: Mon May 22, 2017 3:47 am

Re: Motec M4 which laptop?

Postby Stephen Dean on Mon May 22, 2017 5:58 pm

Hi,

If you are just running the M4 Manager program, that laptop could be used. I have used one's with lower specs than that has (such as netbooks) without issues, other than speed and lack of storage.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
Stephen Dean
Site Admin
 
Posts: 1721
Joined: Tue Dec 02, 2014 10:29 am
Location: Melbourne

Re: Motec M4 which laptop?

Postby Marky on Tue May 23, 2017 7:22 am

Thanks Stephen I'll get a Dell 630 then. Also how do you get the full screen as the last time it was mapped we could only get a small screen and was hard to see everything that needed adjusting
Thanks Mark
Marky
 
Posts: 5
Joined: Mon May 22, 2017 3:47 am

Re: Motec M4 which laptop?

Postby Stephen Dean on Tue May 23, 2017 9:49 am

Hi,

Getting a large enough window to be able to read the data correctly means that quite often you have to play around with the screen resolution and font size to get the window large enough. Some systems will allow for the DOS window that the M4 software works in to go full screen, and others won't.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
Stephen Dean
Site Admin
 
Posts: 1721
Joined: Tue Dec 02, 2014 10:29 am
Location: Melbourne

Re: Motec M4 which laptop?

Postby AdamW on Wed May 24, 2017 5:32 am

Marky wrote:Thanks Stephen I'll get a Dell 630 then. Also how do you get the full screen as the last time it was mapped we could only get a small screen and was hard to see everything that needed adjusting
Thanks Mark

Alt+Enter switches it to full screen mode. Note I would suggest you choose a laptop with win XP as it draws the graph views correctly. Windows Vista or later you need to use dosbox or the std Low res vga driver to get graph view which just makes it more painful.
Motorsport Electronics Ltd.
AdamW
Pro User
 
Posts: 265
Joined: Wed Nov 16, 2011 10:08 am

Re: Motec M4 which laptop?

Postby Marky on Thu May 25, 2017 7:34 am

Thanks Adam I have just placed an order today for a Dell 630 with windows 7. Will this be ok as I think it's too late to amend and change to windows XP
Thanks
Marky
 
Posts: 5
Joined: Mon May 22, 2017 3:47 am

Re: Motec M4 which laptop?

Postby stevieturbo on Thu May 25, 2017 10:29 pm

Search this forum for "dosbox"

There are responses for both XP and W7

eg

viewtopic.php?f=10&t=2642&p=11704

viewtopic.php?f=10&t=2085&p=9939

viewtopic.php?f=10&t=1152&p=9612
stevieturbo
 
Posts: 499
Joined: Fri Jul 11, 2008 3:32 am

Re: Motec M4 which laptop?

Postby Marky on Sat May 27, 2017 6:09 pm

Superb thanks. After the response about preferably using ASAP, I emailed the guy and luckily he hadn't sent the laptop out and has said he will install windows XP instead of win 7. Should have the laptop on Wednesday so fingers crossed
Thanks
Marky
 
Posts: 5
Joined: Mon May 22, 2017 3:47 am

Re: Motec M4 which laptop?

Postby stevieturbo on Sat May 27, 2017 11:00 pm

XP probably more sensible all round
stevieturbo
 
Posts: 499
Joined: Fri Jul 11, 2008 3:32 am

Re: Motec M4 which laptop?

Postby greenamex2 on Sun May 28, 2017 3:45 am

Has anybody tried XP or similar under VMware Workstation/Player?
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 370
Joined: Fri Sep 12, 2014 7:06 am
Location: England

Next

Return to M4 and M48 ECUs (including M2R and MLS variants)

Who is online

Users browsing this forum: No registered users and 4 guests