How do you setup GPS

[Hipsi]

Hi everyone. I've got a C125 Track kit. I can't for the life of me find the information on how to setup the included GPS receiver in the Dash Manager. I know you have to set it up as an RS232 device but that's about it.

[Hipsi]

Found the manual for the L10 receiver. Doesn't have any details for setup specific to the C125 but the ADL/CDL settings look pretty much the same. There are 2 different RS232 options on the C125 though which isn't mentioned. I'll try each and see how I go.

[adrian]

If you go File>New and then select one of the ECU's it will have the GPS/buttons etc already configured to match the track kit. Otherwise simply setup the GPS in RS232-2 by selecting the GPS Template as per below:

GPS Setup.png (14.26 KiB) Viewed 9573 times