my name is Mike, I'm from Germany and try to get a M130 Series running on my bike (CBR1000RR). I also have a ADL3 with SLM and recently purchased a LTCD with one Bosch Lambda Sensor connected. The ADL3 is on my bike since 4-5 years, using the available sensors from the stock bike, but now want to get the engine more to the limit, so after a call with the German Motec dealer, he thoughts best would be a M130 Series. Before I change the wiring loom on the bike, I like to try as much as possible with the ADL3, SLM, LTCD and M130 setup on my desk with a power supply and some sensors wired.
And actually I try to get some Buttons and Switches connected/ controlled, and here is where I'm stucked. On my left handlebar are two Buttons "TC+ and TC-", this Buttons have to be read in by the ADL3, processed and send via CAN to the M130. Is there a option to create "global variables" inside the ADL3 and this variable can be changed by the value of "+/-1" when the TC Buttons are pressed? Or is there a simpler way? I still try to find it out on my own, but maybe with a Little help of some "old professionals
" I save some time!Thanks in advance and best regards,
Mike
