injector Setup

[CarloL]

Thanks again Stephen , trying to get a handle on the software;)

[harky]

David Fergerson
You pointed to an injector list in 2015 1.04 firmware
Is that in the M series software ? And is it accessible to anyone ?
That list would be useful to a lot of us
Thanks for any advice
Harky

[CarloL]

Harky if you download the M1 Tune software and the GPR (M150) 1.07 February 2016 M150 402 23072
package , you can see the list of all injectors characterised

Package
https://moteconline.motec.com.au/Package

Make sure you have the latest package updates, The green box in the top Right Hand corner of M1 Tune is the Updates notification, if you click on that and install the updates listed in all of the tabs

Drop down list of injector Calibrations under Fuel Injector Primary Calibration and Fuel Injector Secondary Calibration parameters, this is found in 2: Initial Setup | 8 Injectors.

[CarloL]

Hi Stephen

The Siemens Deka FI-114961 is in the list twice (630 cc)

Should one of the setting be for the 840cc ? Siemens Deka FI-114991

I am hoping its a Typo

[Stephen Dean]

Thanks for the spot there!

I have passed it on to the engineers to investigate and resolve.

[CarloL]

That has to be worth a free Hat ot Tshirt