Default OKM settings for 06-07 WRX STI (2.5L)

[mrsaturn7085]

I recently purchased an OKM to retrofit to a WRX9-10 board. Default jumper settings are as follows:

Differential Mode Switch = off; normal knock sensor connection (default)
Gain = 2 (default)
Knock Centre Frequency = 10 kHz (default)

Could you please provide the correct default jumper settings for the following application:

06-07 Subaru WRX STI w/EJ257 (2.5L, single AVCS) motor

Motor is completely stock internally, with only minor external modifications (open exhaust, panel air filter).

[SprinterTRD]

Use 14Khz for the knock frequency. Then read the SKM/OKM user manual, it has detailed instruction on how to use the SKM/OKM

[mrsaturn7085]

14kHz - thank you.

Do you know the default gain jumper setting?

I have read the OKM/SKM manual cover-to-cover three times, and I'm just trying to start with the same baseline that this board would ship with for my application.

[SprinterTRD]

Most OEM sensors work with the standard gain settings so no need to change them.