Critical sensors

Forum for general discussions on engine tuning, not specific to a particular motec ECU

Critical sensors

Postby greenamex2 on Wed Aug 19, 2015 12:35 am

Hi all

I have the following sensors on my M130 attached (eventually) to a Nissan V6 running ITB and Naturally Aspirated -

Coolant temp
Oil temp
Oil pressure
Fuel temp
Fuel pressure
Lambda (two, one per bank via LTCD)
Throttle position
Air pressure (One, assuming this is going to just be barometric)
Air temperature (One, assuming this is going to just be air box temperature)
Gear position (Hewland sequential box)
Knock sensor (single mounted in the middle of the V)

Keeping in mind my limited number of input (albeit to improve with the next GPA release, thanks!), are there any other important sensors, possibly even more important than above?

Any other comments welcome....owing to a number of unfortunate circumstances I am having to be engine builder/ECU installer/wiring loom manufacturer/milling maching operator/welder/customer etc and am more than willing to accept more experienced advice.

Thanks in advance.
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 370
Joined: Fri Sep 12, 2014 7:06 am
Location: England

Re: Critical sensors

Postby PQatPIT on Fri Aug 28, 2015 8:36 pm

I'd add gear lever force sensor to tell ecu when driver tries to shift gears up or down. This to aid smooth shifting. :)
PQatPIT
 
Posts: 77
Joined: Fri Jul 11, 2008 10:51 pm

Re: Critical sensors

Postby greenamex2 on Fri Aug 28, 2015 8:51 pm

Cheers. Any more?
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 370
Joined: Fri Sep 12, 2014 7:06 am
Location: England

Re: Critical sensors

Postby Sean on Sat Aug 29, 2015 10:21 pm

Its not a sensor as such, but if you have enough inputs a 9 position rotary pot/switch is often handy. Can be used for many trims and things, especially useful when initially testing the vehicle on track.
Sean
 
Posts: 254
Joined: Sun Dec 21, 2008 12:35 pm
Location: Adelaide or Auckland

Re: Critical sensors

Postby greenamex2 on Sat Aug 29, 2015 11:52 pm

Definitely doing that. Looking out for a MDD or D153 for the right money.

If not then using some spare outputs....got to love the m130's flexibility!
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 370
Joined: Fri Sep 12, 2014 7:06 am
Location: England

Re: Critical sensors

Postby stevieturbo on Sun Aug 30, 2015 1:23 am

denis bassom wrote:Definitely doing that. Looking out for a MDD or D153 for the right money.

If not then using some spare outputs....got to love the m130's flexibility!



If you're after a display a bit cheaper than the Motec stuff, this Plex dash is great.

http://www.plex-tuning.com/products/plex-sdm-500
stevieturbo
 
Posts: 499
Joined: Fri Jul 11, 2008 3:32 am

Re: Critical sensors

Postby tepid1 on Tue Sep 01, 2015 9:06 am

You're gonna need vehicle speed in there as well. Front and Rear if you want traction control (GPR).
Coolant pressure is handy. Helps diagnose head gasket failure.
EGT is nice to have as well.

Are these critical, no, but they sure come in handy quite often.
tepid1
 
Posts: 50
Joined: Thu Jan 20, 2011 1:49 am


Return to Tuning discussions

Who is online

Users browsing this forum: No registered users and 6 guests

cron