M4 3.72 software

[cotje]

Hi, we have an old M4 with software version 3.72 in the ECU but cannot run the correct software. The floppy disk that came with the M4 is defective. Loading other versions from the website gives the warning of incompatible software version. Upgrading fails because we do not have the SUU. The PCI cable is working just fine.

Can anyone supply me the 3.7/3.72 software?

Thanks in advance!!

[stevieturbo]

Dont see that version listed anywhere ?

http://www.motec.com.au/software/oldreleases/

http://www.motec.com.au/software/latestreleases/

[cotje]

Indeed, strangely enough! We have the floppydisk with 3.7 but it won't read from that after all those years.
So, if anyone can supply the 3.7 or 3.72 version I would be very happy!

Also, where could I go for upgrading this unit to the latest version. The SUU is needed to get the upgrade working. Anyone here with this unit?

[cotje]

Hi all,

Was able to repair the floppy disks

Here is the link for anyone interesed:
http://95.96.126.28/motec/M4-V37.rar