Lambda sensor

Forum for general discussions on engine tuning, not specific to a particular motec ECU

Lambda sensor

Postby greenamex2 on Sat Jan 03, 2015 5:35 am

Hi all

Just was interested in what the general feeling was regarding the usefulness of lambda sensors in a road/track day car once it has already been mapped?

Any thoughts?

Thanks in advance.
Motec CDL3+M130+LTCD+MDD+PDM15+PDM16M+ESDL3
Nissan VQ30DE fitted to an AM Sportscars EX2 with a Hewland HP 2000
greenamex2
 
Posts: 370
Joined: Fri Sep 12, 2014 7:06 am
Location: England

Re: Lambda sensor

Postby David Ferguson on Sat Jan 03, 2015 10:03 am

If you have it, then you can run closed loop, allowing the ECU to compensate slightly if something wasn't tuned perfectly -- perhaps running at an unusual temperature, elevation. Or even compensating for slight mechanical issues (fuel or air filter starting to clog, different fuel blends). So the Lambda sensor keeps the engine running it best all the time.

The other reason to run it is when the engine doesn't run right. The Lambda is one of the first pieces of data we use to determine what the issue might be.

My general feeling is -- it's a must have, like air and fuel in the right ratio.
David Ferguson
Veracity Racing Data
David Ferguson
Pro User
 
Posts: 1379
Joined: Fri Nov 07, 2008 2:45 am
Location: Paso Robles, California

Re: Lambda sensor

Postby stevieturbo on Sun Jan 04, 2015 10:04 am

From a diagnostic point of view, I see it as essential.

That means it needs to be there full time and logged.

Whether you also use it for any corrections is up to you or your tuner. But it should always be recorded where possible.

And add to that where the ecu allows a lean lambda safety mode, again it makes sense for this to be operational.
stevieturbo
 
Posts: 499
Joined: Fri Jul 11, 2008 3:32 am


Return to Tuning discussions

Who is online

Users browsing this forum: No registered users and 2 guests