LA1/LA2 as an AT/AV input

[Russ]

On an M800 OEM (Evo 47) is it possible to use LA1 and LA2 as AV/AT inputs?
I've run out of AV and AT inputs and want to fit a DBW throttle, so I'd want to use them as TPS 0-5v inputs.

Thanks

[MileyCyrus]

Hi Russ,

At least with the regular M800, both the LA1S and LA2S inputs are cabale of acting as a regular AV inputs, so I'm pretty sure you should be fine in using you plug-in with normal AV sensors.

Cheers,

[Russ]

Excellent, thank you Nathan

[Scott@FP]

If I remember correctly you have to swap some jumpers on the board.