Backlight brightness on c1212

Discussion on the use of Display creator software for MoTeC Colour displays

Backlight brightness on c1212

Postby Boosted1122 on Wed Aug 14, 2024 7:29 am

I had my backlight brightness on my c1212 switch on the pdm output for the headlights in manager, but I can not figure out how to do this on display creator. Can anyone please help!
Boosted1122
 
Posts: 1
Joined: Tue Aug 13, 2024 3:21 am

Re: Backlight brightness on c1212

Postby Stephen Dean on Wed Aug 14, 2024 3:10 pm

Hi,

This is configured under the Channels and Functions Tab in Display Creator.

Backlight Control Properties
The backlight control can be used to adjust the brightness of the display backlight. The brightness value can be configured with a constant value, or assigned the value of a channel.

When using a channel, the channel must be configured in one of the following ways:

Use a 'float' channel. The channel must have a Quantity of 'unitless' or 'ratio'.
For 'unitless', the channel value must be in the range 0.0...100.0
For 'ratio' the channel value must be in the range 0.0...1.0
Use an Integer or Unsigned Integer channel.
The channel value must be in the range 0...100
Use a 'bool' channel.
When the channel is 'True' the backlight will be on (100%)
When the channel is 'False' the backlight will be off (0%)
Use an enumerated channel. The numeric value of each enumerated value must be in the range 0...100
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
Stephen Dean
Site Admin
 
Posts: 1728
Joined: Tue Dec 02, 2014 10:29 am
Location: Melbourne


Return to Display Creator

Who is online

Users browsing this forum: No registered users and 2 guests