MoTeC Global Forum

I have D153 display and downloaded Display Creater. Howerver, I need to send analog and digital inputs info to CAN bus. I think Display Creater is only allow to configure receiving CAN messages or am I missing something? Thank you in advance.
happyLogger Posts: 1Joined: Mon Jul 10, 2017 3:45 pm

A D153 will send input and switch status on the CAN bus. The template "D1 Receive" found in the ADL3 and Color Dash Managers will provide you with info on what channels and other details (Compound Messages on address 0x0E9)

The D153 Data sheet refers to this information:

http://motec.com.au/filedownload.php/18 ... docid=4259